7 Configure the VoIP
Parameter Description
Primary Proxy Port Port number that the ISP provides for communication between the ac-
tive server and VoIP terminals, which must be the same as that con-
figured on the SIP server, default: 5060.
Secondary Proxy Server IP address of the standby SIP proxy server that the ISP provides,
which must be the same as that configured on the SIP server.
Secondary Outbound
Proxy Server
IP address of the standby outbound proxy server that the ISP pro-
vides, which must be the same as that configured on the SIP server.
Secondary Proxy Port Port number that the ISP provides for communication between the
standby server and VoIP terminals, which must be the same as that
configured on the SIP server, default: 5060.
Register Expires Registered lifecycle, unit: seconds, default: 3600.
Unregister On Reboot Whether to deregister VoIP terminals after the server is restarted.
Link Test Whether to enable link tests.
Link Test Interval Interval of link tests, default: 20 seconds.
3. Click Apply button to apply the changes.
7.5 Configure the Media
This procedure describes how to configure the media codec type.
Steps
1. On the main page of the ZXHN H3600 device, select VoIP > Media to the Media
page, see Figure 7-6.
Figure 7-6 Media Page
2. Configure the media parameters. Table 7-5 describes the media parameters.
SJ-20201203151144-003 | 2021-06-16(R1.0) 77
To Next Page
Loading...
