ZXHN H3600 Maintenance Management Guide
Figure 8-4 Device Management Page
2. On this page, you can perform the following operations:
Click Reboot to reboot the ZXHN H3600 device.
Click Factory Reset to restore the factory default settings.
8.3.2 Upgrade Software
This procedure introduces how to upgrade Software.
Prerequisite
Make sure that the upgrade file is ready.
Steps
1. On the main page of the ZXHN H3600, select Management&Diagnosis > System
Management > Software Upgrade to the Software Upgrade page, see Figure 8-5.
Figure 8-5 Software Upgrading Page
2. Click Browse to select the upgrade version file.
82 SJ-20201203151144-003 | 2021-06-16(R1.0)
To Next Page
Loading...
