Zte ZXR10 5250 Series - Figure 5-13 Qos Configuration Instance

ZXR105250SeriesCongurationGuide
CommandFunction
zte(cfg)#clearqospolicer-counter<counterlist>Clearstheowpolicerstatistics
value.
zte(cfg)#clearqospolicer<0-383>Clearstheowpolicer
conguration.
showqospolicer[<0-383>](allcongurationmodes)Displaystheowpolicer
conguration.
showqospolicy-counter[<0-1023>](allcongurationmodes)Displaysthecountervalueofthe
speciedow.
showqospolicer-counter[<0-383>](allcongurationmodes)Displaystheowpolicerstatistics
value.
showpolicy[mirror|redirect|statistics|policing[<0-383>]|
vlan-remark|remark|harddrop](allcongurationmodes)
Displaysvariousbinding
congurationofthespecied
ow.
zte(cfg)#seticmpprotect{enable|disable}SetstheICMPprotectionfunction.
QoSCongurationInstance
lCongurationDescription
Usethe5250–28TCasanexample,settheuplinkbandwidthofalltheuser-interface
to2Mbps.Theuplinkbandwidthoftheswitchis20Mbps.Theuplinkportisport26
andtheclientPCaccessesthenetworkthroughport24.SeeFigure5-13.
Figure5-13QoSCongurationInstance
lCongurationProcedure
zte(cfg)#setqostraffic-limitge-port1data-rate2000
zte(cfg)#setqostraffic-limitge-port2data-rate2000
/*Omitted*/
5-58
SJ-20131111172707-002|2013-11-27(R1.0)ZTEProprietaryandCondential