Zte ZXR10 5250 Series - Telnet

Chapter6Management
Note:
InSTAmode,ifaportisaddedtomultipleinstances,theindicatoroftheportindicatesthe
STAstateintherstinstance.
M_ButtonFunctionModeSwitch
1.Thereisamodebuttononthepanel.Pressitonce,andthentheindicatorforthenext
mode(basedonthesequenceontheswitchpanel)ashesfor2seconds.Ifthebutton
isnotpressedin2seconds,themodeindicatorisoff.Thedeviceentersthismode
andexecutesfunctionsofthismode.Ifthebuttonispressedin2seconds,thenext
modeindicatorbeginsashing.Thepreviousprocessisrepeated.
2.Inamode,ifthemodebuttonisnotpressedin3minutes,thedeviceexitsfromthis
modeautomaticallytotheLINKmode.Ifthebuttonispressed,thedeviceentersthe
nextmode.Thecorrespondingmodeindicatorbeginsashing,whichisasdescribed
in1.
3.InthePINGmode,apingpacketissentonceper20seconds.Inothermodes,the
statusesareupdatedinrealtime.
6.10Telnet
TelnetOverview
AsamemberoftheTCP/IPprotocolfamily,theT elnetprotocolisthestandardprotocolfor
theremoteInternetloginservice.Withthisprotocol,userscanperformoperationsona
remoteswitchthroughalocalPC.
AZTEswitchcanbeusedasbothaT elnetclientandaT elnetserver.
UsercansetthelisteningportnumberwhenthedeviceisloggedintothroughT elnet,also
usercansettheportnumberandsourceIPaddresswhenthedeviceisusedasaTelnet
clienttologintoanotherdevice.
TelnetConguration
TheTelnetcongurationincludesthefollowingcommands:
CommandFunction
zte(cfg)#setTelnetserver{enable|disable}
Enables/disablestheTelnetserver
function,whichisenabledby
default.
6-51
SJ-20131111172707-002|2013-11-27(R1.0)ZTEProprietaryandCondential