Zte ZXR10 5250 Series - Pppoe-PLUS Configuration; Figure 5-36 PPPOE-PLUS Configuration Instance Topology

ZXR105250SeriesCongurationGuide
cascadeport:none
5.30PPPoE-PLUSConguration
PPPoE-PLUSOverview
ThetypicaluserlocationtechnologyhasPPPoE-PLUS(PPPoE+)besidesVBASand
DHCPOPTION82.PPPOE+technologyinsertsuserlocationinformationinPADI/PADR
messagebymonitoringthePADpacketinteractingprocedurebetweenPCandBAS
server.PPPoE+isdividedintothreetypesbasedontheformatoftheinserteduser
information,ChinaT elecomformat,DSLBBSformat,andCISCOformat.TheZXR10
5250alsosupportsuser-denedformats.
ConguringPPPoE-PLUS
ThecongurationofPPPoE-PLUS(PPPoE+)includesthefollowingcontents:
CommandFunction
zte(cfg)#setpppoe-plus{enable|disable}EnablesordisablesthePPPoE+
function.
zte(cfg)#setpppoe-plustag-formatport<portlist>{dsl-forum|
cisco|china-tel|manual<string>|key<string>}
SetsthePPPoE+location
messageformat.
zte(cfg)#setpppoe-plusrid<portlist>[<string>]Addsordeletesportrid
information.
showpppoe-plus(allcongurationmodes)DisplaysPPPoE+global
conguration.
showpppoe-plusport<1-28>(allcongurationmodes)Displaysportridconguration.
zte(cfg)#setpppoe-plusmodeport<portlist>{default|drop|
modify}
Setsthemodefordynamicuser
informationprocessingattheport.
PPPoE-PLUSCongurationInstance
lCongurationDescription
ConguretheuserinformationformatofswitchAasDSLforumformat.SeeFigure
5-36.
Figure5-36PPPOE-PLUSCongurationInstanceTopology
lCongurationProcedure
5-106
SJ-20131111172707-002|2013-11-27(R1.0)ZTEProprietaryandCondential