Zte ZXR10 5250 Series - Figure 5-53 MFF Configuration Instance

Chapter5ServiceConguration
CommandFunction
zte(cfg)#setmffgateway-user-keepaliveadd-port
{<portlist>|all}{timeout<value>}{enable|disable}
SetstheARPkeep-aliveparameterforusers
connectedtothegatewaydevicethatsends
gratuitousARPkeep-alivepackets,andenables
ordisablesthekeep-alivefunction.
zte(cfg)#clearmffgatewayDeletestheglobalMFFgateway.
zte(cfg)#clearmffgatewayarp-keepalive-portClearstheportsthatsendgatewayARP
keep-alivepackets.
zte(cfg)#clearmffgatewayuser-keepalive-portClearstheportsthatsenduserARPkeep-alive
packets.
zte(cfg)#clearmffvlan<vlanlist>gatewayDeletestheintra-VLANMFFgateway.
zte(cfg)#clearmffuserip<ip-addr>vlan
<vlan-id>
DeletesthespeciedMFFuserentry.
zte(cfg)#showmffuser-tableDisplaysinformationabouttheMFFusertable.
zte(cfg)#showmffinterfaceDisplaysinformationaboutMFFport
conguration.
zte(cfg)#showmffgatewayDisplaysinformationaboutMFFgateway
conguration.
zte(cfg)#showmffgateway-keepalive-info{port}DisplaysinformationaboutARPkeep-alive
conguration,includinggatewayARPkeep-alive
congurationanduserARPkeep-alive
conguration.
MFFCongurationInstance
lCongurationDescription
SeeFigure5-53,ports1and2oftheswitchareconnectedtoPCs,port4isconnected
tothegateway,andport6isconnectedtotheDHCPserver.Thefollowingprocedure
describeshowtocongurestaticMFF .ThecongurationfordynamicMFFissimilar,
butitisnecessarytoconguretheDHCPsnoopingfunction.Fordetails,referto5.27
DHCPConguration.
Figure5-53MFFCongurationInstance
5-147
SJ-20131111172707-002|2013-11-27(R1.0)ZTEProprietaryandCondential