Zte ZXR10 5250 Series - Page 209

Chapter5ServiceConguration
CommandFunction
zte(cfg)#debugprotocoldhcpv6enableEnablesthedebugfunctionoftheDHCPv6
module.
zte(cfg)#debugprotocoldot1xdisableDisablesthedebugfunctionforthedot1x
protocol.
zte(cfg)#debugprotocoldot1xenableEnablesthedebugfunctionforthedot1xprotocol.
zte(cfg)#debugprotocollayer3ipdisableDisablesthedebugfunctionoflayer3IP
messages.
zte(cfg)#debugprotocollayer3ipenableEnablesthedebugfunctionoflayer3IP
messages.
zte(cfg)#debugprotocollayer3ipportShowsstatisticaldataofallipports.
zte(cfg)#debugprotocollayer3ipport<0-63>Showsstatisticaldataofanipport.
zte(cfg)#debugprotocollayer3arpdisableDisablesthedebugfunctionofARPmessages.
zte(cfg)#debugprotocollayer3arpenableEnablesthedebugfunctionofARPmessages.
zte(cfg)#debugprotocolsnmpdisableDisablesthedebugfunctionfortheSNMP
protocol.
zte(cfg)#debugprotocolsnmpenableEnablesthedebugfunctionfortheSNMP
protocol.
DebugModuleCongurationExample
TheZXR105250providesdebugcommandstocheckthestatusofprotocolmessage
sendingandreceiving.
1.Runthedebugprotocollayer3arpenablecommandtocheckthedebuginformationof
ARPmessages.
ThefollowinginformationisanexampleofthehostreceivingorsendingARP
messages:
zte(cfg)#ARP:receivedrequestscr168.1.23.50000.0000.0001,dst168.1.23.218ipport1
Enterdisabletodisablethedebugfunction.
2.Runthedebugprotocollayer3ipenablecommandtothedebuginformationofIP
messages,includingthelink-mtuparameterofIPports,MACaddressesforreceiving
messages,andsizeofIPmessages.
Thiscommandshowstheinformationoftheprocessduringwhichthemessages
aresenttotheprotocollayer,forexample,hostmessages.Ifthemessagesare
forwardedthroughfastrouting,themessagescannotbedebuggedbythiscommand.
Thefollowinginformationisanexampleofexecutionresultsofthiscommand.
zte(cfg)#IP:receivedpacketmac:002421738150-->mac:002293634f70onport1
IP:pointertoallocatedbufferforport0001,2112840,bytes:114
IP:pointertosendpacketforport0001,211284c
5-161
SJ-20131111172707-002|2013-11-27(R1.0)ZTEProprietaryandCondential