Zte ZXR10 5250 Series - Page 44

ZXR105250SeriesCongurationGuide
Versionupgradeoperationsperformedinproperandimproperswitchsystemsare
different.
DisplayingtheVersionInformation
Ifthesystemstatusallows,checktheversioninformationbeforeandaftertheupgrade.
Inglobalcongurationmode,usetheshowversioncommandtodisplaythesystem
hardwareandsoftwareversioninformation.
Thedisplayedcontentsareasfollows:
zte(cfg)#showversion
ZXR10RouterOperatingSystemSoftware,ZTECorporation:
ZXR105250-28TCVersionNumber:5250SeriesV2.05.11B04
Copyright(c)2001-2013ByZTECorporation
Compiled:11:14:25Aug272013
Systemuptimeis0years1days13hours20minutes46seconds
Mainprocessor:arm926ejs
BootromVersion:v2.03CreationDate:Aug272013
SystemMemory:128MbytesSystemFlash:256Mbytes
EPLDVersion(Dno.):V1.0
PCBVersion(Dno.):V1.0
ProductVersion(Dno.):V1.0
ImageDownFrom:Flash
ImageDownUsername:N/A
ImageDownTime:N/A
ImageDownSize:10262580bytes
Onboardtemperature:38.0degreecentigrade(100.0degreefahrenheit)
StartupFrom:/img/zImage
Switch'sMacAddress:00.d0.d0.ff.00.86
Module0:ZXR105250-28TC;fasteth:0;gbit:48;
UpgradingtheVersionWhentheSystemisNormal
Iftheswitchoperatesproperly,upgradetheversionasfollows:
1.Connecttheconsoleportoftheswitchtotheserialportoftheback-endcomputerby
usingaprovidedcongurationcable.ConnectanEthernetportoftheswitchtothe
networkportoftheback-endcomputerbyusinganetworkcable.Ensurethatthe
connectionsarecorrect.
2.SettheIPaddressoftheEthernetportontheswitch.SettheIPaddressofthe
back-endcomputerusedforupgrade.ThetwoIPaddressesmustbeinthesame
networksegmentsothatthecomputercanpingtheswitchsuccessfully.
3.StarttheTFTPserversoftwareontheback-endcomputerandcongureitbyreferring
to4.2ConguringtheTFTPServer.
4.Ontheswitch,usetheshowversioncommandtochecktheinformationofcurrent
operatingversion.
4-12
SJ-20131111172707-002|2013-11-27(R1.0)ZTEProprietaryandCondential