Zte ZXR10 5250 Series - Page 99

Chapter5ServiceConguration
CommandFunction
zte(egress-hybrid-acl)#rule<1-500>{permit|deny}ipv6
udp{<source-ipv6addr><sipv6-mask>|any}[ssourrce-porrtt<
0-65535><sport-mask>][<destination-ipv6addr><dipv6-mask>|
any][desstt-porrtt<0-65535><dport-mask>][<vlan-id>]
SetsahybridegressACLthat
matchesIPv6-UDPpackets.
zte(egress-hybrid-acl)#rule<1-500>{permit|deny}ipv6any
{<source-ipv6addr><sipv6-mask>|any}[<destination-ipv6addr><
dipv6-mask>|any][<vlan-id>]
SetsahybridegressACLthat
matchesIPv6packets.
zte(egress-hybrid-acl)#rule<1-500>{permit|deny}allSetsahybridegressACLthat
matchesanypacket.
zte(cfg)#clearegress-aclhybridnumber<700-799>ClearsahybridegressACL
instance.
zte(cfg)#configingress-acluser-defineudb<1-15>anchor
<0-3>[offset<0-31>][data-length<1-6>]
Setsauser-denedanchorand
offset.
zte(cfg)#configingress-acluser-defineudb<1-15>description
<string>
Setsadescriptionfora
user-denedbyte.
zte(cfg)#clearacludb<1-15>description
Clearsthedescriptionofa
user-denedbyte.
move<1-500>{after|before}<1-500>(allACLconguration
modes)
SortsrulesinACLinstance.
clearrule<1-500>(allACLcongurationmodes)ClearsoneruleinACLinstance.
zte(cfg)#showvlan-range<vlan-range>Displaysthebestmask
congurationwhenVLANID
ismatchedinbatch.
zte(cfg)#showaclbinding{all|port[<portlist>]|vlan[<vlanlist>]}Displaystheconguration
informationthatACLisboundto
theinterface.
zte(cfg)#showaclconfigDisplaysACLsummary
conguration.
zte(cfg)#showaclconfig[<1-828>|name<word>][active|
command|deny|passive|permit|policy|rule<1-500>|snmp
|time-range]
Displaysthedetailedconguration
ofACLinstance.
zte(cfg)#showacludb
Displaysdetailedcongurationsof
user-denedbytes.
zte(cfg)#createacl<1-828>description<description>SetsACLdescriptions.
zte(cfg)#clearacl<1-828>descriptionDeletesACLdescriptions.
ACLCongurationInstance
lCongurationDescription
5-51
SJ-20131111172707-002|2013-11-27(R1.0)ZTEProprietaryandCondential