Zte ZXR10 - Commands to Configure DHCP Server

Chapter Error! Style not defined. Error! Style not defined.
3-7
Parameter description:
Name Range Description
max-user 512~1024 Maximum capacity of the MAC address list
aging-time 10~100,000 Aging time of the MAC address list entries
alarm-percent 1~10 Percent of alarms
3.4.3 Commands to Configure DHCP Server
1. dhcp server dns
Command mode: Configure mode
Function: Configure the IP addresses of the master/slave DNS server in the
DHCP server
Command format: wlan (config) # dhcp server dns A.B.C.D [A.B.C.D]
Parameter description:
Name Range Description
A.B.C.D IP address IP address of the master DNS server
[A.B.C.D] IP address IP address of the slave DNS server (optional)
2. dhcp server gateway
Command mode: Configure mode
Function: Configure the IP address of the default gateway of the DHCP server
Command format: wlan (config) # dhcp server gateway A.B.C.D
Parameter description:
Name Range Description
A.B.C.D IP address IP address of the gateway
3. dhcp server leasetime
Command mode: Configure mode
Function: Configure the address lease time of the DHCP server
Command format: wlan (config) # dhcp server leasetime time-value