Chapter Error! Style not defined. Error! Style not defined.
3-35
xx-xx-xx-xx-xx-xx key1-string key2-string used-key
wlan
（
config-int-wlan
）
#no 80211b dynamic-key xx-xx-xx-xx-xx-xx
wlan（config-int-wlan）#80211b dynamic-key enable xx-xx-xx-xx-xx-xx
wlan（config-int-wlan）#no 80211b dynamic-key enable xx-xx-xx-xx-xx-xx
Note: The 80211b dynamic-key key command is used to set the dynamic key
for a specified MAC address. The 80211b dynamic-key enable command is
used to enable this dynamic key.
Parameter description:
Name Range Description
xx-xx-xx-xx-xx-xx MAC address
MAC address of the wireless user using the dynamic
key
key1-string 5 or 13 characters
First dynamic key (the key length can only be 5 or
13 characters)
key2-string 5 or 13 characters
Second dynamic key (the key length can only be 5
or 13 characters)
used-key key1, key2 Key number that is used
3. 80211b enh-security enable
Command mode: Wireless interface configuration mode
Function: Set to enable or disable the enhanced security function of AP
Command format: wlan (config) #[no] 80211b enh-security enable
Note: If the enhanced security function is enabled, the wireless terminal will not
be able to scan the AP. If this function is disabled, the AP can be scanned.
4. 80211b essid
Command mode: Wireless interface configuration mode
Function: Set ESSID of the wireless network
Command format: wlan (config-int-wlan) #80211b essid essid-string
Parameter description:
Name
Range
Description
essid-string
1~31 characters
ESSID of the wireless network. By default, it is
zxwlan.
To Next Page
Loading...
