Instrument status: initialization, incubation, running, stop, shutdown, standby,
maintenance.
Self-checking process of the instrument after startup
The temperature reaches the requirement after 30 minutes of
startup, and the self-check function of the instrument meets the
requirements of the test (the self-check is normal), and the
instrument is ready for testing.
The user triggers the stop button, the instrument stops running,
and the test item will be invalid.
The user triggers the pause button, the instrument stops
loading cuvettes and adding samples, and supports
resubmission to resume test.
The user can load the sample directly to start the test after
loading the reagent. When the reagent is loaded, the
instrument shows standby, and other states show incubation.
Maintenance (manual maintenance, regular maintenance,
daily maintenance)
1) Analyzer connection status: Highlighted means connected, gray means
disconnected;
2) LIS connection status: Highlighted means connected, gray means
disconnected;
3) Instrument temperature: The current incubation tray temperature is displayed
by default. If the incubation tray temperature does not reach the normal
measurable temperature, the icon will be displayed in red, and the trigger
temperature icon will enter the temperature display interface, displaying 4
temperature modules: incubation tray, reagent tray, and barcode scanning,
ambient temperature.
◼ Status bar
(1) Status display area
Displays the current logged-in user, system date and time;
User: The current login username and level are displayed in the lower left corner;
To Next Page
Loading...