Zybio EXI1820 - Page 55

Basic Operating Methods
５５
Parameters
Meaning
Operation
Item Name
Item to QC test
No operation required
QC Name
Name of control for QC test
No operation required
Result
QC test results
No operation required
Photon quantity
Photon quantity measured by QC test
No operation required
Lot No. of control
Lot No. of control for QC test
No operation required
Lot No. of reagent
Lot No. of reagent for QC test
No operation required
Reagent No.
Reagent kit No. for QC test
No operation required
Test time
QC test time
No operation required
Lot No. of
substrate
Lot No. of substrate for QC test
No operation required
Substrate vial No.
No. of substrate vial for QC test
No operation required
Basic operations
Method 1:
1) Click [QC], to enter QC interface;
2) Select the item to be checked in the [QC List];
3) Select the QC test result to be checked in [QC List];
4) Select a QC test result;
5) The QC data will be showed in auto-pop window.
Method 2:
1) Click [QC] to enter QC interface;
2) Select the item to be checked in the [QC List];
3) The QC trend chart defaults to display the 30-day QC test results;
4) Select a QC test point in QC test trend chart;
5) The QC data will be showed in auto-pop window.