EasyManua.ls Logo

ZyXEL Communications NBG-418N v2 - Page 86

ZyXEL Communications NBG-418N v2
228 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 7 WAN
NBG-418N v2 User’s Guide
86
Figure 60 Network > WAN > IPv6 (PPPoE)
The following table describes the labels in this screen.
Table 34 Network > WAN > IPv6 (PPPoE)
LABEL DESCRIPTION
IPv6 Connection
Type
Select PPPoE if your ISP requires your to use a PPPoE connection to IPv6 Internet. This
method of connection typically requires you to enter a Username and Password
(provided by your ISP) to gain access to the IPv6 Internet. You need to ensure that any
PPPoE client software on your computer is removed or disabled.
PPPoE
User Name Enter a user name (of up to 31 printable characters) for login using PPPoE connection.
Password Enter a password.
Service Name Enter a service name if your ISP requires one.
MTU Size Enter the MTU or the largest packet size per frame that your NBG-418N v2 can receive
and process.

Table of Contents

Related product manuals