ZyXEL Communications NWA3560-N - Edit AP List

Chapter 9 Wireless
NWA3000-N Series User’s Guide
104
The following fields display if the Ndevice is in standalone mode.
9.3.1 Edit AP List
Select an AP and click the Edit button in the Configuration > W ireless > AP Managem ent table
to display this screen. Use this screen to set the managed AP’s general wireless settings.
Figure 41 Configuration > Wireless > Edit AP List
Each field is described in the following table.
Table 38 Configuration > Wireless > AP Management (Standalone Mode)
LABEL DESCRIPTION
Model This field displays the AP’s hardware model information. It displays “N/ A” (not
applicable) only when the AP disconnects from the device and the information
is unavailable as a result.
R1 Mode / Profile This field displays the AP or MON profile for Radio 1.
R2 Mode / Profile If the device has a second radio this field displays the AP or MON profile for
Radio 2.
Table 39 Configuration > Wireless > Edit AP List
LABEL DESCRIPTION
Create new Object Use this menu to create a new Radio or SSI D object to associate with this AP.
MAC Address This displays the MAC address of the selected AP.
Model This field displays the AP’s hardware model information. It displays “N/ A” (not
applicable) only when the AP disconnects from the device and the information
is unavailable as a result.
Description Enter a description for this AP. You can use up to 31 characters, spaces and
underscores allowed.