ZyXEL Communications NWA3560-N - Add;Edit MON Profile

Chapter 13 MON Profile
NWA3000-N Series User’s Guide
153
13.2.1 Add/Edit MON Profile
This screen allows you to create a new monitor mode profile or edit an existing one. To access this
screen, click the Add button or select and existing monitor mode profile and click the Edit button.
Figure 70 Configuration > Object > MON Profile > Add/ Edit MON Profile
The following table describes the labels in this screen.
Table 61 Configuration > Object > MON Profile > Add/ Edit MON Profile
LABEL DESCRIPTION
Activate Select this to activate this monitor mode profile.
Profile Name This field indicates the name assigned to the monitor mode profile.
Channel dwell time Enter the interval (in milliseconds) before the AP switches to another channel
for monitoring.
Scan Channel Mode Select auto to have the AP switch to the next sequential channel once the
Channel dw ell tim e expires.
Select manual to set specific channels through which to cycle sequentially
when the Channel dw ell tim e expires. Selecting this options makes the
Scan Channel List options available.