ZyXEL Communications NWA3560-N - User Summary

Chapter 11 User
NWA3000-N Series User’s Guide
128
11.2 User Summary
The User screen provides a summary of all user accounts. To access this screen click
Configuration > Object > User.
Figure 57 Configuration > Object > User
The following table describes the labels in this screen.
11.2.1 Add/Edit User
The User Add/ Edit screen allows you to create a new user account or edit an existing one.
11.2.1.1 Rules for User Names
Enter a user name from 1 to 31 characters.
The user name can only contain the following characters:
• Alphanumeric A-z 0-9 (there is no unicode support)
Table 48 Configuration > Object > User
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can
modify the entry’s settings.
Rem ove To rem ove an entry, select it and click Remove. The device confirms you want to
remove it before doing so.
Object
References
Select an entry and click Object References to open a screen that shows which
settings use the entry.
# This field is a sequential value, and it is not associated with a specific user.
User Name This field displays the user name of each user.
User Type This field displays type of user this account was configured as.
• admin - this user can look at and change the configuration of the device
• lim ited-admin - this user can look at the configuration of the device but not
to change it
• user - this user has access to the device’s services but cannot look at the
configuration
Description This field displays the description for each user.