Chapter 3 Configuration Basics
NWA3000-N Series User’s Guide
46
3.4.3 MON Profile
Use these screens to set up monitor mode configurations that allow your connected APs to scan for
other wireless devices in the vicinity.
3.5 System
This section introduces some of the management features in the device. Use Host Nam e to
configure the system and domain name for the device. Use Date/ Time to configure the current
date, time, and time zone in the device. Use Console Speed to set the console speed. Use
Language to select a language for the Web Configurator screens.
3.5.1 WWW, SSH, TELNET, FTP, SNMP, and Auth. Server
Use these screens to set which services or protocols can be used to access the device.
3.5.2 Logs and Reports
The device provides a system log, offers two e-mail profiles to which to send log messages, and
sends information to four syslog servers. It can also e-mail you statistical reports on a daily basis.
3.5.3 File Manager
Use these screens to upload, download, delete, or run scripts of CLI commands. You can manage:
• Configuration files. Use configuration files to back up and restore the complete configuration of
the device. You can store multiple configuration files in the device and switch between them
without restarting.
• Shell scripts. Use shell scripts to run a series of CLI commands. These are useful for large,
repetitive configuration changes and for troubleshooting.
You can edit configuration files and shell scripts in any text editor.
Table 15 MON Profile Types
TYPE ABILITIES
Monitor Create monitor mode configurations that can be used by the APs to
periodically listen to a specified channel or number of channels for other
wireless devices broadcasting on the 802.11 frequencies.
MENU ITEM(S)
Configuration > System > WW W , SSH, TELNET, FTP, SNMP, Auth.
Server
PREREQUISITES
certificates (WWW, SSH, FTP)
MENU ITEM(S)
Configuration > Log & Report
MENU ITEM(S)
Maintenance > File Manager
To Next Page
Loading...
