Chapter 4 Tutorials
NWA3000-N Series User’s Guide
63
2 Click the Add button.
When the Edit Rogue/ Friendly AP List opens, paste the MAC address copied from the other
screen in the corresponding field, set its Role as Rogue AP and then click OK to save your
changes.
3 The new rogue AP appears in the Rogue/ Friendly AP List.
Select it, then click the Containm ent button to quarantine it away from the rest of the network.
4.3 Load Balancing
When your AP becomes overloaded, there are two basic responses it can take. The first one is to
“delay” a client connection by withholding the connection until the data transfer throughput is
lowered or the client connection is picked up by another AP. (If the client isn’t picked up after a set
period of time, the AP allows it to connect regardless.) The second response is to kick the
connections until the AP is no longer considered overloaded. Both of these tactics are known as
‘load balancing’.
This tutorial shows you how to configure the device’s load balancing feature.
To Next Page
Loading...
