ZyXEL Communications NWA3560-N - Console Speed

Chapter 15 System
NWA3000-N Series User’s Guide
180
To get the device date and time from a time server:
1 Click System > Date/ Tim e.
2 Select Get from Tim e Server under Time and Date Setup.
3 Under Tim e Zone Setup, select your Tim e Zone from the list.
4 Under Tim e and Date Setup, enter a Tim e Server Address.
5 Click Apply.
15.4 Console Speed
This section shows you how to set the console port speed when you connect to the device via the
console port using a terminal emulation program. See
Table 1 on page 23 for default console port
settings.
Click Configuration > System > Console Speed to open this screen.
Figure 82 Configuration > System > Console Speed
The following table describes the labels in this screen.
Table 72 Configuration > System > Console Speed
LABEL DESCRIPTION
Console Port Speed Use the drop-down list box to change the speed of the console port. Your
device supports 9600, 19200, 38400, 57600, and 115200 bps (default) for the
console port.
The Console Port Speed applies to a console port connection using terminal
emulation software and NOT the Console in the device Web Configurator
Status screen.
Apply Click Apply to save your changes back to the device.
Reset Click Reset to return the screen to its last-saved settings.