Chapter 3 Configuration Basics
NWA3000-N Series User’s Guide
45
3.4 Objects
Objects store information and are referenced by other features. If you update this information in
response to changes, the device automatically propagates the change through the features that use
the object. Select an object (such as a user) and then click Object Reference at the top of the list
box where the object appears in order to display basic information about it.
The following table introduces the objects. You can also use this table when you want to delete an
object because you have to delete references to the object first.
3.4.1 User
Use these screens to configure the device’s administrator and user accounts. The device provides
the following user types.
3.4.2 AP Profile
Use these screens to configure preset profiles for the Access Points (APs) connected to your
device’s wireless network.
Table 12 Objects Overview
OBJECT WHERE USED
user
See the User section on page 45 for details.
ap profile See the AP Profile section on page 45 for details.
mon profile See the MON Profile section on page 46 for details.
certificates WWW, SSH, FTP, controller
Table 13 User Types
TYPE ABILITIES
admin Change device configuration (web, CLI)
limited-admin Look at device configuration (web, CLI). Perform basic diagnostics (CLI)
user Access network services. Browse user-mode commands (CLI)
Table 14 AP Profile Types
TYPE ABILITIES
Radio Create radio profiles for the APs on your network.
SSID Create SSID profiles for the APs on your network.
Security Create security profiles for the APs on your network.
MAC Filtering Create MAC filtering profiles for the APs on your network.
To Next Page
Loading...
