ZyXEL Communications NWA3560-N - Page 177

Chapter 15 System
NWA3000-N Series User’s Guide
177
To change your device’s time based on your local time zone and date, click Configuration >
System > Date/ Tim e. The screen displays as shown. You can manually set the device’s time and
date or have the device get the date and time from a time server.
Figure 80 Configuration > System > Date/ Time
The following table describes the labels in this screen.
Table 70 Configuration > System > Date/ Time
LABEL DESCRIPTION
Current Time and
Date
Current Time This field displays the present time of your device.
Current Date This field displays the present date of your device.
Time and Date
Setup
Manual Select this radio button to enter the time and date manually. If you configure a
new time and date, time zone and daylight saving at the same time, the time
zone and daylight saving will affect the new time and date you entered. When
you enter the time settings manually, the device uses the new setting once you
click Apply.
New Time (hh-mm-
ss)
This field displays the last updated time from the time server or the last time
configured manually.
When you set Time and Date Setup to Manual, enter the new time in this
field and then click Apply.
New Date
(yyyy-mm-dd)
This field displays the last updated date from the time server or the last date
configured manually.
When you set Time and Date Setup to Manual, enter the new date in this
field and then click Apply.