Chapter 16 Log and Report
NWA3000-N Series User’s Guide
211
Mail Server Type the name or IP address of the outgoing SMTP server.
Mail Subject Type the subject line for the outgoing e-m ail.
Send From Type the e-mail address from which the outgoing e-mail is delivered. This
address is used in replies.
Send Log To Type the e-mail address to which the outgoing e-mail is delivered.
Send Alerts To Type the e-mail address to which alerts are delivered.
Sending Log Select how often log information is e-mailed. Choices are: W hen Full,
Hourly and W hen Full, Daily and When Full, and W eekly and W hen
Full.
Day for Sending
Log
This field is available if the log is e-mailed weekly. Select the day of the
week the log is e-mailed.
Time for Sending
Log
This field is available if the log is e-mailed weekly or daily. Select the time of
day (hours and minutes) when the log is e-mailed. Use 24-hour notation.
SMTP
Authentication
Select this check box if it is necessary to provide a user nam e and password
to the SMTP server.
User Nam e This box is effective when you select the SMTP Authentication check box.
Type the user name to provide to the SMTP server when the log is e-mailed.
Password This box is effective when you select the SMTP Authentication check box.
Type the password to provide to the SMTP server when the log is e-mailed.
Active Log and Alert
System log Use the System Log drop-down list to change the log settings for all of the
log categories.
disable all logs (red X) - do not log any information for any category for
the system log or e-mail any logs to e-mail server 1 or 2.
enable norm al logs (green check mark) - create log messages and alerts
for all categories for the system log. If e-mail server 1 or 2 also has normal
logs enabled, the device will e-mail logs to them.
enable norm al logs and debug logs (yellow check mark) - create log
messages, alerts, and debugging information for all categories. The device
does not e-mail debugging information, even if this setting is selected.
E-mail Server 1 Use the E-Mail Server 1 drop-down list to change the settings for e-
mailing logs to e-mail server 1 for all log categories.
Using the System Log drop-down list to disable all logs overrides your e-
mail server 1 settings.
enable norm al logs (green check mark) - e-mail log messages for all
categories to e-mail server 1.
enable alert logs (red exclamation point) - e-mail alerts for all categories
to e-mail server 1.
E-mail Server 2 Use the E-Mail Server 2 drop-down list to change the settings for e-
mailing logs to e-mail server 2 for all log categories.
Using the System Log drop-down list to disable all logs overrides your e-
mail server 2 settings.
enable norm al logs (green check mark) - e-mail log messages for all
categories to e-mail server 2.
enable alert logs (red exclamation point) - e-mail alerts for all categories
to e-mail server 2.
Table 84 Configuration > Log & Report > Log Setting > Edit (continued)
LABEL DESCRIPTION
To Next Page
Loading...
