Chapter 4 Tutorials
NWA3000-N Series User’s Guide
60
2 Click the Add button.
When the Add Mon Profile window opens, configure the following:
Activate: Select this to allow your monitor APs to use this profile.
Profile Nam e: For the purposes of this tutorial set this to ‘Monitor01’.
Channel Dw ell Tim e: Leave this as the default 100 milliseconds. This field is the number of
milliseconds that the monitor AP scans each channel before moving on to the next.
Scan Channel Mode: Set this to auto to automatically scan channels in the area.
3 Click OK to save your changes.
4 Next, click Configuration > W ireless > AP Managem ent.
To Next Page
Loading...
