Chapter 10 Firewalls
P-79X Series User’s Guide
105
10.3.1 Configuring Firewall Rules
Refer to Section 10.1.2 on page 100 for more information.
Use this screen to configure firewall rules. In the Rules screen, select an index number and click
Add or click a rule’s Edit icon to display this screen and refer to the following table for information
on the labels.
Log This field shows you whether a log is created when packets match this rule (Yes)
or not (No).
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Remove icon to delete an existing firewall rule. A window displays asking
you to confirm that you want to delete the firewall rule. Note that subsequent
firewall rules move up by one when you take this action.
Order Click the Move icon to display the Move the rule to field. Type a number in the
Move the rule to field and click the Move button to move the rule to the number
that you typed. The ordering of your rules is important as they are applied in order
of their numbering.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 36 Security > Firewall > Rules (continued)
LABEL DESCRIPTION
To Next Page
Loading...
