P-79X Series User’s Guide
157
CHAPTER 15
Static Route
15.1 Overview
The P-79X usually uses the default gateway to route outbound traffic from computers on the LAN to
the Internet. To have the P-79X send data to devices not reachable through the default gateway,
use static routes.
For example, the next figure shows a computer (A) connected to the P-79X’s LAN interface. The P-
79X routes most traffic from A to the Internet through the P-79X’s default gateway (R1). You
create one static route to connect to services offered by your ISP behind router R2. You create
another static route to communicate with a separate network behind a router R3 connected to the
LAN.
Figure 94 Example of Static Routing Topology
15.2 The Static Route Screen
Use this screen to view the static route rules. Click Advanced > Static Route to open the Static
Route screen.
To Next Page
Loading...
