ZyXEL Communications P-792H v3 - Connect the P-79 Xs; Configuring a Point-To-2 Points Connection

Chapter 5 Tutorials
P-79X Series User’s Guide
40
4 Scroll down to the Service Type section. In the Service Mode field, select 2 wire, the same type
of connection you selected for the server. In the Service Type field, select Client. The rest of the
fields will be negotiated with the server. Click Apply.
5.2.3 Connect the P-79Xs
Connect the DSL ports on the P-79Xs together, and wait while the P-79Xs automatically establish
the connection. When the connection is established, the DSL1, DSL2, and INTERNET lights are
on. It takes up to half a minute to establish the connection. If the P-79Xs do not establish the
connection, verify that the settings (except the Service Type) match.
5.3 Configuring a Point-to-2points Connection
Now Company A has another branch office, C and wants to set up a point-to-2points connection
between a server P-79X on A’s side and client P-79Xs at B and C. The maximum transfer rate for
the DSL connection between A and B is 5696 Kbps and the minimum transfer rate is 3200 Kbps.
The maximum transfer rate for the DSL connection between A and C is 2560 Kbps and minimum
transfer rate is 1280 Kbps.