P-79X Series User’s Guide
38
CHAPTER 5
Tutorials
5.1 Overview
This chapter describes:
• Configuring Point-to-point Connection, see page 38
• Configuring a Point-to-2points Connection, see page 40
Note: The tutorials featured in this chapter require a basic understanding of connecting to
and using the Web Configurator on your P-79X. For details, see the included Quick
Start Guide. For field descriptions of individual screens, see the related technical
reference in this User's Guide.
5.2 Configuring Point-to-point Connection
In this scenario, Company A wants to set up a point-to-point connection with its branch office B by
using two P-79Xs. The two P-79Xs are directly connected together through their DSL ports. The P-
79X on A’s side is the server and the P-79X on B’s side is the client. The maximum transfer rate for
the DSL connection between A and B is 5696 Kbps and the minimum transfer rate is 3200 Kbps.
To set up the point-to-point connection between A and B, you need to:
1 Set Up the Server.
2 Set Up the Client.
3 Connect the P-79Xs.
5.2.1 Set Up the Server
1 Log in to the server P-79X of Company A.
To Next Page
Loading...
