ZyXEL Communications P-792H v3 - Main Window; Status Bar

Chapter 2 Introducing the Web Configurator
P-79X Series User’s Guide
24
2.3.3 Main Window
The main window displays information and configuration fields. It is discussed in the rest of this
document.
Right after you log in, the Status screen is displayed. See Chapter 3 on page 25 for more
information about the Status screen.
2.3.4 Status Bar
Check the status bar when you click Apply or OK to verify that the configuration has been updated.
Remote
MGMT
WWW Use this screen to configure through which interface(s) and
from which IP address(es) users can use HTTPS or HTTP to
manage the P-79X.
Telnet Use this screen to configure through which interface(s) and
from which IP address(es) users can use Telnet to manage the
P-79X.
SSH Use this screen to configure through which interface(s) and
from which IP address(es) users can use SSH to manage the
P-79X.
SNMP Use this screen to configure your P-79X’s settings for Simple
Network Management Protocol management.
DNS Use this screen to configure through which interface(s) and
from which IP address(es) users can send DNS queries to the
P-79X.
ICMP Use this screen to set whether or not your P-79X will respond
to pings and probes for services that you have not made
available.
CWMP Use this screen to configure your P-79X to be managed by an
Auto Configuration Server (ACS).
UPnP General Use this screen to turn UPnP on or off.
Maintenance
System General Use this screen to configure your P-79X’s name, domain
name, management inactivity timeout and password.
Time Setting Use this screen to change your P-79X’s time and date.
Logs View Log Use this screen to display your P-79X’s logs.
Log Settings Use this screen to select which logs and/or immediate alerts
your P-79X is to record. You can also set it to e-mail the logs
to you.
Tools Firmware Use this screen to upload firmware to your P-79X.
Configuration Use this screen to backup and restore your P-79X’s
configuration (settings) or reset the factory default settings.
Restart This screen allows you to reboot the P-79X without turning
the power off.
Diagnostic General Use this screen to test the connections to other devices.
DSL Line These screen displays information to help you identify
problems with the DSL connection.
Table 6 Navigation Panel Summary
LINK TAB FUNCTION