Chapter 21 System Settings
P-79X Series User’s Guide
202
Click Maintenance > System to open the General screen.
Figure 120 Maintenance > System > General
The following table describes the labels in this screen.
Table 82 Maintenance > System > General
LABEL DESCRIPTION
System Setup
System Name Choose a descriptive name for identification purposes. It is recommended you
enter your computer’s “Computer name” in this field. This name can be up to 30
alphanumeric characters long. Spaces are not allowed, but dashes “-” and
underscores "_" are accepted.
Domain Name Enter the domain name (if you know it) here. If you leave this field blank, the ISP
may assign a domain name via DHCP.
The domain name entered by you is given priority over the ISP assigned domain
name.
The Domain Name entry is propagated to the DHCP clients on the LAN.
Administrator
Inactivity Timer
Type how many minutes a management session (either via the web configurator
or telnet) can be left idle before the session times out. The default is 5 minutes.
After it times out you have to log in with your password again. Very long idle
timeouts may have security risks. A value of "0" means a management session
never times out, no matter how long it has been left idle (not recommended).
Password
User Password
New
Password
Type your new user password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type. After you change
the password, use the new password to access the P-79X.
Retype to
confirm
Type the new password again for confirmation.
Admin Password
Old
Password
Type the default password or the existing password you use to access the system
in this field.
To Next Page
Loading...
