ZyXEL Communications UAG2100 - 8.1.1 What You Can Do in this Chapter; 8.1.2 What you Need to Know; 8.2 Registration Screen

Chapter 8 Registration
UAG2100 User’s Guide
100
8.2 Registration Screen
Click the link in this screen to register your UAG with myZyXEL.com. The UAG should already have
Internet access before you can register it. Click Configuration > Licensing > Registration in the
navigation panel to open the screen as shown next.
Figure 61 Configuration > Licensing > Registration
8.3 Service Screen
Use this screen to display the status of your service registrations. To activate or extend a standard
service subscription, purchase an iCard and enter the iCard’s PIN number (license key) at
myZyXEL.com. Click Configuration > Licensing > Registration > Service to open the screen as
shown next.
Figure 62 Configuration > Licensing > Registration > Service
The following table describes the labels in this screen.
Table 44 Configuration > Licensing > Registration > Service
LABEL DESCRIPTION
License Status
# This is the entry’s position in the list.