Chapter 24 Web Authentication
UAG2100 User’s Guide
227
24.3 Walled Garden Screen
A user must log in before the UAG allows the user’s access to the Internet. However, with a walled
garden, you can define one or more web site addresses that all users can access without logging in.
These can be used for advertisements for example.
Use this screen to configure walled garden web addresses for web sites that all users are allowed to
access without logging in. The web site link(s) then displays in the user login screen.
Click Configuration > Web Authentication > Walled Garden to display the screen.
Figure 150 Configuration > Web Authentication > Walled Garden
The following table gives an overview of the objects you can configure.
Table 103 Configuration > Web Authentication > Walled Garden
LABEL DESCRIPTION
Enable Walled
Garden
Select this to turn on the walled garden feature.
Note: This feature works only when you set web authentication to Web Portal.
Walled Garden
Summary
Use this table to manage the list of walled garden links.
Add Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
Move To move an entry to a different number in the list, click the Move icon. In the field that
appears, specify the number to which you want to move the interface.
# This field is a sequential value, and it is not associated with any entry.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
Name This field displays the descriptive name of web site.
URL This field displays the address of web site.
To Next Page
Loading...
