Chapter 41 Log and Report
UAG2100 User’s Guide
398
Category Settings screen to edit what information is included in the system log, USB storage, e-
mail profiles, and remote servers.
41.3.1 Log Settings Summary
To access this screen, click Configuration > Log & Report > Log Settings.
Figure 276 Configuration > Log & Report > Log Settings
The following table describes the labels in this screen.
Table 197 Configuration > Log & Report > Log Settings
LABEL DESCRIPTION
Edit Double-click an entry or select it and click Edit to open a screen where you can modify it.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
# This field is a sequential value, and it is not associated with a specific log.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
Name This field displays the type of log setting entry (system log, logs stored on a USB storage device
connected to the UAG, or one of the remote servers).
Log
Format
This field displays the format of the log.
Internal - system log; you can view the log on the View Log tab.
VRPT/Syslog - ZyXEL’s Vantage Report, syslog-compatible format.
CEF/Syslog - Common Event Format, syslog-compatible format.
To Next Page
Loading...
