ZyXEL Communications UAG2100 - Wireless; 9.1 Overview

UAG2100 User’s Guide
102
CHAPTER 9
Wireless
9.1 Overview
Use the Wireless screens to configure how the UAG manages the Access Points (APs) that are
connected to it.
9.1.1 What You Can Do in this Chapter
•The Controller screen (Section 9.2 on page 102) sets how the UAG allows new APs to connect to
the network.
•The AP Management screen (Section 9.3 on page 103) manages all of the APs connected to the
UAG.
9.2 Controller Screen
Use this screen to set how the UAG allows new APs to connect to the network. Click Configuration
> Wireless > Controller to access this screen.
Figure 63 Configuration > Wireless > Controller