Chapter 24 Web Authentication
UAG2100 User’s Guide
228
24.3.1 Adding/Editing a Walled Garden URL
Click Configuration > Web Authentication and then the Add (or Edit) icon in the Walled
Garden Summary section to open the Add/Edit Walled Garden URL screen. Use this screen to
configure a walled garden web site address entry.
Note: You can configure up to 20 walled garden URL links.
Figure 151 Configuration > Web Authentication > Walled Garden > Add/Edit
The following table gives an overview of the objects you can configure.
24.3.2 Walled Garden Login Example
The following figure shows the user login screen with two walled garden links. The links are named
WalledGardenLink1 through 2 for demonstration purposes.
Apply Click this button to save your changes to the UAG.
Reset Click this button to return the screen to its last-saved settings.
Table 103 Configuration > Web Authentication > Walled Garden (continued)
LABEL DESCRIPTION
Table 104 Configuration > Web Authentication > Walled Garden > Add/Edit
LABEL DESCRIPTION
Enable Select this to activate the entry.
Name Enter a descriptive name for the walled garden link to be displayed in the login screen.
You can use up to 31 alphanumeric characters (A-Z, a-z, 0-9) and underscores (_). Spaces
are also allowed. The first character must be a letter.
URL Enter the URL or IP address of the web site.
Use “http://” followed by up to 262 characters (0-9a-zA-Z;/?:@&=+$\.-_!~*'()%). For
example, http://www.example.com or http://172.16.1.35.
Preview Click this button to open the specified web site in a new frame.
OK Click OK to save your changes back to the UAG.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
