ZyXEL Communications UAG2100 - 24.1.1 What You Can Do in this Chapter; 24.1.2 What You Need to Know; Forced User Authentication; Finding Out More

Chapter 24 Web Authentication
UAG2100 User’s Guide
214
24.1.2 What You Need to Know
Forced User Authentication
Instead of making users for which user-aware policies have been configured go to the UAG Login
screen manually, you can configure the UAG to display the Login screen automatically whenever it
routes HTTP traffic for anyone who has not logged in yet.
Note: This works with HTTP traffic only. The UAG does not display the Login screen when
users attempt to send other kinds of traffic.
The UAG does not automatically route the request that prompted the login, however, so users have
to make this request again.
Finding Out More
See Section 24.2.2 on page 221 for an example of using an authentication policy for user-aware
access control.
24.2 Web Authentication Screen
The Web Authentication screen displays the web portal settings and web authentication policies
you have configured on the UAG. The screen differs depending on what you select in the
Authentication field.
Click Configuration > Web Authentication to display the screen.