ZyXEL Communications UAG2100 - 40.12 Language

Chapter 40 System
UAG2100 User’s Guide
394
40.12 Language
Click Configuration > System > Language to open this screen. Use this screen to select a
display language for the UAG’s Web Configurator screens.
Figure 274 Configuration > System > Language
The following table describes the labels in this screen.
Table 195 Configuration > System > Language
LABEL DESCRIPTION
Language Setting Select a display language for the UAG’s Web Configurator screens. You also need to open
a new browser session to display the screens in the new language.
Apply Click Apply to save your changes back to the UAG.
Reset Click Reset to return the screen to its last-saved settings.