Chapter 35 Schedules
UAG2100 User’s Guide
325
35.2 The Schedule Summary Screen
The Schedule summary screen provides a summary of all schedules in the UAG. To access this
screen, click Configuration > Object > Schedule.
Figure 214 Configuration > Object > Schedule
The following table describes the labels in this screen. See Section 35.2.1 on page 326 and Section
35.2.2 on page 327 for more information as well.
Table 161 Configuration > Object > Schedule
LABEL DESCRIPTION
One Time
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
Object
Reference
Select an entry and click Object Reference to open a screen that shows which settings
use the entry. See Section 10.3.2 on page 117 for an example.
# This field is a sequential value, and it is not associated with a specific schedule.
Name This field displays the name of the schedule, which is used to refer to the schedule.
Start Day /
Time
This field displays the date and time at which the schedule begins.
Stop Day /
Time
This field displays the date and time at which the schedule ends.
Recurring
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
Object
Reference
Select an entry and click Object Reference to open a screen that shows which settings
use the entry. See Section 10.3.2 on page 117 for an example.
# This field is a sequential value, and it is not associated with a specific schedule.
Name This field displays the name of the schedule, which is used to refer to the schedule.
Start Time This field displays the time at which the schedule begins.
Stop Time This field displays the time at which the schedule ends.
To Next Page
Loading...
