Chapter 7 Monitor
UAG2100 User’s Guide
69
•Use the VPN 1-1 Mapping screen (see Section 7.16 on page 91) to view the status of the active
users to which the UAG applied a VPN 1-1 mapping rule.
•Use the VPN 1-1 Mapping > Statistics screen (see Section 7.16.1 on page 92) to display
statistics for each of the VPN 1-1 mapping rules.
•Use the Log > View Log screen (see Section 7.17 on page 92) to view the UAG’s current log
messages. You can change the way the log is displayed, you can e-mail the log, and you can also
clear the log in this screen.
•Use the Log > View AP Log screen (see Section 7.17.1 on page 95) to view the UAG’s current
wireless AP log messages.
•Use the Log > Dynamic Users Log screen (see Section 7.17.2 on page 97) to view the UAG’s
dynamic guest account log messages.
7.2 The Port Statistics Screen
Use this screen to look at packet statistics for each Gigabit Ethernet port. To access this screen,
click Monitor > System Status > Port Statistics.
Figure 39 Monitor > System Status > Port Statistics
The following table describes the labels in this screen.
Table 19 Monitor > System Status > Port Statistics
LABEL DESCRIPTION
Poll Interval Enter how often you want this window to be updated automatically, and click Set
Interval.
Set Interval Click this to set the Poll Interval the screen uses.
Stop Click this to stop the window from updating automatically. You can start it again by setting
the Poll Interval and clicking Set Interval.
Switch to
Graphic View
Click this to display the port statistics as a line graph.
# This field displays the port’s number in the list.
Port This field displays the physical port number.
To Next Page
Loading...
