Chapter 9 Wireless
UAG2100 User’s Guide
105
Model This field displays the AP’s hardware model information. It displays N/A (not
applicable) only when the AP disconnects from the UAG and the information is
unavailable as a result.
Description Enter a description for this AP. You can use up to 31 characters, spaces and underscores
allowed.
Radio 1/2 OP Mode Select the operating mode for radio 1 or radio 2.
AP Mode means the AP can receive connections from wireless clients and pass their
data traffic through to the UAG to be managed (or subsequently passed on to an
upstream gateway for managing).
Radio 1/2 Profile Select a profile from the list. If no profile exists, you can create a new one through the
Create new Object menu.
Force Overwrite
VLAN Config
Select this to have the UAG change the AP’s management VLAN to match the
configuration in this screen.
Management VLAN
ID
Enter a VLAN ID for this AP.
As Native VLAN Select this option to treat this VLAN ID as a VLAN created on the UAG and not one
assigned to it from outside the network.
OK Click OK to save your changes back to the UAG.
Cancel Click Cancel to close the window with changes unsaved.
Table 47 Configuration > Wireless > AP Management > Edit AP List (continued)
LABEL DESCRIPTION
To Next Page
Loading...
