ZyXEL Communications UAG2100 - Page 274

Chapter 29 SMS
UAG2100 User’s Guide
274
The following table describes the labels in this screen.
Table 129 Configuration > SMS
LABEL DESCRIPTION
General Settings
Enable SMS Select the check box to turn on the SMS feature on the UAG.
Default country
code for phone
number
Enter the default country code for the mobile phone number to which you want to send
SMS messages.
ViaNett
Configuration
User Name Enter the user name for your ViaNett account.
Password Type the Password associated with the user name.
Retype to
Confirm
Type your password again for confirmation.
License
Licensed Service
Status
This field displays whether the service is activated (Licensed) or not (Not Licensed).
Note: You must subscribe to the SMS service before you can use the service to send a text
message.
License Type This field displays Standard when the service is activated. Otherwise, it displays None.
Register Now Click the link to go to myZyXEL.com where you can register your UAG and activate the
service.
This link is available only when the service is not activated yet.
Apply Click this button to save your changes to the UAG.
Reset Click this button to return the screen to its last-saved settings.