Chapter 7 Monitor
UAG2100 User’s Guide
94
The Web Configurator saves the filter settings if you leave the View Log screen and return to it
later.
Keyword This displays when you show the filter. Type a keyword to look for in the Message,
Source, Destination and Note fields. If a match is found in any field, the log message
is displayed. You can use up to 63 alphanumeric characters and the underscore, as well
as punctuation marks ()’ ,:;?! +-*/= #$% @ ; the period, double quotes, and brackets
are not allowed.
Protocol This displays when you show the filter. Select a service protocol whose log messages you
would like to see.
Search This displays when you show the filter. Click this button to update the log using the
current filter settings.
Email Log Now Click this button to send log message(s) to the Active e-mail address(es) specified in the
Send Log To field on the Log Settings page (see Section 41.3.2 on page 399).
Refresh Click Refresh to update this screen.
Clear Log Click this button to clear the whole log, regardless of what is currently displayed on the
screen.
# This field is a sequential value, and it is not associated with a specific log message.
Time This field displays the time the log message was recorded.
Priority This field displays the priority of the log message. It has the same range of values as the
Priority field above.
Category This field displays the log that generated the log message. It is the same value used in
the Display and (other) Category fields.
Message This field displays the reason the log message was generated. The text “[count=x]”,
where x is a number, appears at the end of the Message field if log consolidation is
turned on (see Log Consolidation in Table 198 on page 401). and multiple entries were
aggregated to generate into this one.
Source This field displays the source IP address and the port number in the event that generated
the log message.
Destination This field displays the destination IP address and the port number of the event that
generated the log message.
Note This field displays any additional information about the log message.
Table 41 Monitor > Log (continued)
LABEL DESCRIPTION
To Next Page
Loading...
