ZyXEL Communications VMG3925-B10A - Page 204

Chapter 19 Parental Control
VMG3925-B10A User’s Guide
204
Figure 117 Parental Control Rule: Add/Edit Rule > Add New Service
Figure 118 Parental Control Rule: Add/Edit Rule > Add Keyword
The following table describes the fields in this screen.
Table 89 Parental Control Rule: Add/Edit
LABEL DESCRIPTION
General
Active Select to enable or disable this parental control rule.
Parental
Control Profile
Name
Enter a descriptive name for the rule.
Home Network
User
Select the LAN user that you want to apply this rule to from the drop-down list box. If you
select Custom, enter the LAN user’s MAC address. If you select All, the rule applies to all
LAN users. Click Add to add the user NAC address to the Rule List.
Rule List Up to five are allowed. Click the Delete icon to remove one.
Internet Access Schedule
Day Select check boxes for the days that you want the VMG to perform parental control.
Time Drag the time bar to define the time that the LAN user is allowed access (Authorized
access). Click the + sign above the time bar to add a new time bar. Up to three are allowed.
Click the Delete icon to remove the corresponding one.
Network Service
Network
Service Setting
If you select Block, the VMG prohibits the users from using the service listed below.
If you select Allow, the VMG blocks all services except ones listed below.
Add New
service
Click this to show a screen in which you can add a new service rule. You can configure the
Service Name, Protocol, and Name of the new rule.
# This shows the index number of the rule. Select the checkbox next to the rule to activate it.
Service Name This shows the name of the service.
Protocol:Port This shows the protocol and the port of the service.