Chapter 7 Wireless
VMG3925-B10A User’s Guide
86
Finding Out More
See Section 7.10 on page 102 for advanced technical information on wireless networks.
7.2 The General Screen
Use this screen to enable the Wireless LAN, enter the SSID and select the wireless security mode.
Note: If you are configuring the VMG from a computer connected to the wireless LAN and
you change the VMG’s SSID, channel or security settings, you will lose your
wireless connection when you press Apply to confirm. You must then change the
wireless settings of your computer to match the VMG’s new settings.
Click Network Setting > Wireless to open the General screen.
Figure 29 Network Setting > Wireless > General
To Next Page
Loading...
