VMG3925-B10A User’s Guide
31
CHAPTER 4
Tutorials
4.1 Overview
This chapter shows you how to use the VMG’s various features.
• Setting Up an ADSL PPPoE Connection, see page 31
• Setting Up a Secure Wireless Network, see page 34
• Setting Up Multiple Wireless Groups, see page 41
• Configuring Static Route for Routing to Another Network, see page 44
• Configuring QoS Queue and Class Setup, see page 46
• Access the VMG Using DDNS, see page 50
• Configuring the MAC Address Filter, see page 51
• Access Your Shared Files From a Computer, see page 53
4.2 Setting Up an ADSL PPPoE Connection
This tutorial shows you how to set up an ADSL Internet connection using the Web Configurator.
If you connect to the Internet through an ADSL connection, use the information from your Internet
Service Provider (ISP) to configure the VMG. Be sure to contact your service provider for any
information you need to configure the Broadband screens.
1 Click Network Setting > Broadband to open the following screen. Click Add New WAN
Interface.
2 In this example, the DSL connection has the following information.
General
Name MyDSLConnection
Type ADSL
To Next Page
Loading...
