ZyXEL Communications VMG3925-B10A - 37.3 The Reboot Screen

Chapter 37 Backup Restore
VMG3925-B10A User’s Guide
252
Figure 159 Reset Warning Message
Figure 160 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your VMG.
Refer to Section 1.6 on page 19 for more information on the RESET button.
37.3 The Reboot Screen
System restart allows you to reboot the VMG remotely without turning the power off. You may need
to do this if the VMG hangs, for example.
Click Maintenance > Reboot. Click Reboot to have the VMG reboot. This does not affect the
VMG's configuration.
Figure 161 Maintenance > Reboot