Chapter 7 Wireless
VMG3925-B10A User’s Guide
99
Figure 39 Network Setting > Wireless > WDS: Scan
The following table describes the labels in this screen.
7.8 The Others Screen
Use this screen to configure advanced wireless settings. Click Network Setting > Wireless >
Others. The screen appears as shown.
See Section 7.10.2 on page 104 for detailed definitions of the terms listed in this screen.
Table 26 Network Setting > Wireless > WDS: Scan
LABEL DESCRIPTION
Wireless Bridge Scan Setup
Refresh Click Refresh to update the table.
# This is the index number of the entry.
SSID This shows the SSID of the available wireless device within range.
BSSID This shows the MAC address of the available wireless device within range.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
To Next Page
Loading...
