ZyXEL Communications VMG3925-B10A - Interface Grouping Criteria

Chapter 15 Interface Group
VMG3925-B10A User’s Guide
186
15.2.2 Interface Grouping Criteria
Click the Add button in the Interface Grouping Configuration screen to open the following
screen.
Figure 102 Interface Grouping Criteria
The following table describes the fields in this screen.
Table 77 Interface Grouping Criteria
LABEL DESCRIPTION
Source MAC
Address
Select this option and enter the source MAC address of the packet.
DHCP Option
60
Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic,
such as the type of the hardware or firmware.
Enable
wildcard
Select this option to be able to use wildcards in the Vendor Class Identifier configured for
DHCP option 60.
DHCP Option
61
Select this and enter the device identity of the matched traffic.
IAID Enter the Identity Association Identifier (IAID) of the device, for example, the WAN
connection index number.
DUID type Select DUID-LLT (DUID Based on Link-layer Address Plus Time) to enter the hardware
type, a time value and the MAC address of the device.
Select DUID-EN (DUID Assigned by Vendor Based upon Enterprise Number) to enter the
vendor’s registered enterprise number.
Select DUID-LL (DUID Based on Link-layer Address) to enter the device’s hardware type
and hardware address (MAC address) in the following fields.
Select Other to enter any string that identifies the device in the field provided.
Hardware
Type
Enter the device’s hardware type, assigned by the IANA.
Time Enter the time that the DUID is generated.
Link-layer
address
Enter the VMG’s hardware address, that is the MAC address.
Enterprise
Number
Enter the vendor’s registered private enterprise number.