VMG3925-B10A User’s Guide
245
CHAPTER 35
Log Setting
35.1 Overview
You can configure where the VMG sends logs and which logs and/or immediate alerts the VMG
records in the Logs Setting screen.
35.2 The Log Settings Screen
To change your VMG’s log settings, click Maintenance > Logs Setting. The screen appears as
shown.
Figure 150 Maintenance > Logs Setting
The following table describes the fields in this screen.
Table 120 Maintenance > Logs Setting
LABEL DESCRIPTION
Syslog Setting
Syslog Logging The VMG sends a log to an external syslog server. Select Enable to enable syslog logging.
To Next Page
Loading...
