ZyXEL Communications VMG3925-B10A - Page 210

Chapter 21 Certificates
VMG3925-B10A User’s Guide
210
Figure 122 Create Certificate Request
The following table describes the labels in this screen.
After you click Apply to generate a request, you still need to get the certificate request signed by a
Certificate Authority. If you already have, click the request’s Edit icon and then Load_Signed to
import the signed certificate into the VMG.
Table 93 Create Certificate Request
LABEL DESCRIPTION
Certificate
Name
Type up to 63 ASCII characters (not including spaces) to identify this certificate.
Common Name Select Auto to have the VMG configure this field automatically. Or select Customize to
enter it manually.
Type the IP address (in dotted decimal notation), domain name or e-mail address in the field
provided. The domain name or e-mail address can be up to 63 ASCII characters. The
domain name or e-mail address is for identification purposes only and can be any string.
Organization
Name
Type up to 63 characters to identify the company or group to which the certificate owner
belongs. You may use any character, including spaces, but the VMG drops trailing spaces.
State/Province
Name
Type up to 32 characters to identify the state or province where the certificate owner is
located. You may use any character, including spaces, but the VMG drops trailing spaces.
Country/Region
Name
Select a country to identify the nation where the certificate owner is located.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.